TROUBLESHOOTING


P0A05 – 12v Power Supply Fault



This fault is triggered when the voltage measured by the BMS drops below approximately 9v for 5 to 8 seconds. This code remains set even after the voltage has returned to normal.

 

Resolving the issue:

Step 1. Ensure that the 12v supply to the BMS remains above 9v.

Note: revision D and newer units can withstand significant voltage transients and brownouts without interruption while earlier revisions are more susceptible to interruptions.

Copyright (C) 2015 Ewert Energy Systems




Ewert Energy Systems, Inc
161 East St. Charles Rd
Carol Stream, IL 60188

Phone: (630) 868-3173
Fax: (866) 657-5667

Find us:
Facebook Twitter