J1772 Plug State

Default Length (Bytes): 1

This represents the current status (state) of the J1772 inlet on the vehicle.

The following states are possible:

• 0 = Invalid State (unknown)
  

• 1 = Disconnected State (J1772 Plug is disconnected)
  

• 2 = Abort State (J1772 Plug is inserted but the button is depressed)
  

• 3 = Ready State (J1772 Plug is inserted and button is not pressed, BMS is preparing to allow charge)
  

• 4 = Charging State (J1772 Plug is inserted and the BMS has activated the J1772 compatible charging station)