Relay Status

This parameter contains the status of all the BMS outputs and inputs. The format is as follows:

Bit #1 (0x01): Discharge relay enabled
Bit #2 (0x02): Charge relay enabled
Bit #3 (0x04): Charger safety enabled
Bit #4 (0x08): Malfunction indicator active (DTC status)
Bit #5 (0x10): Multi-Purpose Input signal status
Bit #6 (0x20): Always-on signal status
Bit #7 (0x40): Is-Ready signal status
Bit #8 (0x80): Is-Charging signal status

For all of these values, a "1' signifies that the signal or relay in question is enabled or active (high). A "0' indicates that it is inactive or off (low).

< Appendix B: BMS Data ParametersHEM Mode >